Cabinet structure

(1) The oven is composed of a box, a heating system, an electrical control system, an air supply system and a protection system.

(2) The shell of the box is galvanized sheet with baking paint, and the studio material is 304 stainless steel, and the overall design is beautiful and generous

(3) The height and number of brackets can be adjusted at will

(4) The insulation between the studio and the outer box is made of aluminum silicate rock wool insulation material, and the thickness of the insulation layer is 100mm

Air supply ducts

It adopts high-power high-temperature resistant long-axis motor, large-diameter stainless steel turbine fan blade, which can work stably for a long time in a high-temperature environment, and the air duct is equipped with a fish-fin wind regulating plate with a perforated air plate to ensure that the air volume in any position in the box reaches the best consistency.

Temperature control system

Imported digital intelligent temperature controller, constant temperature control mode, PID automatic calculation, temperature control accuracy ± 0.2 °C, with sensor disconnection alarm function, over-temperature suppression, overshoot function, accurate temperature control, low overshoot, with over-temperature alarm protection function, to ensure the safety of product operation.

Electric heating system

SUS304 stainless steel heating tube is used

Electrical safety

The electrical control components are all made of famous brands, reasonable wiring, safe and reliable

Security protection system

(1) Leakage circuit breaker

(2) Control line fuse device

(3) Over-temperature prevention protection device

(4) Electric heating and overcurrent protection equipment

(5) Motor overcurrent protection

(6) Abnormal buzzer warning of the machine

(7) Fault indicator

(8) Fuseless safety switch 

(1) Programmable liquid crystal controller: the heating rate and holding time can be adjusted

(2) Independent temperature limiting controller: the power supply can be cut off immediately when the equipment temperature rises too high after the main controller fails

(3) Damper adjustment: the air volume adjustment device can be installed, and the damper switch program control can also be realized

(4) Multi-channel temperature logger: It can be configured with multi-channel temperature logger, printer or RS485 interface, which is used to connect printer or PC equipment to monitor and record temperature changes.